Uninet / DTFPro Heat Station Purifier Filter Type 1: Carbon Filter
available!
UNINET® Part #PUR-FILTER-CB
Carbon Filter - (Filter 1 for use in the Uninet Heat Station with built-in fume extractor / purifier) removes contaminants through adsorption. Replacing this filter every 2-3 months is recommended.
WARNING: WORK IN A WELL VENTILATED AREA and use protective equipment when working with DTF products and processes. UNINET highly recommends the use of a fume extractor to handle the fumes caused by TPU adhesive powder curing. Bodily protection, including the use of PPE equipment such as a full body covering, a respirator / N95 mask, goggles and gloves are recommended to protect against TPU adhesive powder (prior to curing) that may become airborne due to handling. Inhalation of TPU adhesive powder or fumes may be hazardous to your health. The use of DTF equipment, chemicals, powders, inks and all accessories are at the sole risk of the user. DTF equipment is intended for use in a commercial environment. UNINET does not recommend the use of DTF equipment in a residential, or in-home setting. DTF inks and film require a good humidity environment - over 50% humidity is highly recommended to minimize risk of ink clogs and film buckling.
Sold in packs of
: