Keep your prints sharp, your colors vibrant, and your production running without interruptions.
UNINET™ DTF Cleaning & Maintenance Solutions are designed to support every stage of your printer’s performance—from daily upkeep to deep recovery. Whether you’re preventing clogs with proper wet capping, maintaining printheads during downtime, or tackling stubborn blockages, our specialized solutions give you the control and confidence to keep your equipment in peak condition.
From routine care to last-resort recovery, each formula is purpose-built to protect your investment, extend printhead life, and minimize costly downtime—so you can stay focused on what matters most: creating and selling high-quality custom apparel.
Use to flush printheads and resolve minor clogs.
For damper/CIS systems: Flush the printheads manually using a syringe and tubing.
For cartridge-based systems: Fill cleaning cartridges and run up to three cleaning cycles.
Do not use for wet capping.
Use to flush continuous ink tubing (e.g., when changing ink types) and to help resolve stubborn or severe printhead clogs.
For printhead cleaning, this is a last-resort solution. Always try the regular Printhead Cleaning Solution first, as the XTREME formula is stronger.
For damper/CIS systems:
Flush the printheads directly with this solution.
For cartridge-based systems:
Fill cleaning cartridges and run up to three cleaning cycles.
Do not use for wet capping.
Use for printhead wet capping to help prevent clogs.
Apply only to saturate the printhead resting cap at the end of the business day.
Not intended for printhead cleaning or unclogging— use Cleaning Solution or Xtreme Cleaning Solution for those purposes.
For long-term maintenance (e.g., extended downtime or vacations), use Maintenance Solution instead.
Designed for printhead preservation during downtime (“Vacation Mode”).
Use when your printer will be idle for an extended period—from a few days up to 30 days. This solution helps maintain the printhead’s condition, minimizing performance loss while not in use.
When used as recommended, your printhead will remain in similar condition and quality as when it was last in operation.
This Maintenance Solution does not clean or unclog printheads, nor does it restore damaged ones. It is designed to keep printheads lubricated and preserve them in their current condition.
Before use, ensure your printheads are in good working condition with no clogs or gaps in nozzle tests. If needed, clean them first using the Cleaning Solution or Xtreme Cleaning Solution.
Use only as a preventative maintenance step—not as a cleaning or recovery solution.
Use to remove solidified ink buildup around the printhead, capping station, and wiper blade.
Apply gently with cleaning swabs to affected areas for effective removal of hardened ink residue.
Do not insert this solution into the capping station or printhead channels.
When all else fails, this is your final attempt to revive severely clogged or “dead” printheads.
Designed to tackle the most extreme clogs, this powerful solution can
also be used to flush heavily blocked ink tubing. While results are not
guaranteed, it has helped restore printheads that were otherwise
considered beyond recovery.
Use only as a last-resort recovery option.
If ingested, medical attention may be needed. Store out of direct sunlight between 64° - 77°F (18° - 25°C)
