UNINET DTF 14 in Automated Powder Application and Curing Machine w/ Purifier 120v
available!
UNINET® Part #DTFSHKR14PUR120V
THIS ITEM DOES NOT QUALIFY FOR FREE SHIPPING. A FLAT RATE OF $250 WILL BE ADDED TO THE TOTAL AT CHECKOUT.
Shipping charges for Canada and Int'l destinations will be higher vs domestic shipping rates.
The NEW UNINET DTF 14" Powder Applicator and Curing Machine with built in purifier can cure DTF film rolls and work as an in-line addition with the DTF 1200 (or any roll-to-roll Direct to Film printer). Take your DTF pipeline to the next level with automatic DTF powder application and drying.
REQUIRES A MATCHING DTF ROLL FED PRINTER - THIS ITEM DOES NOT PRINT - IT CURES THE ADHESIVE APPLIED TO THE PRINTED SHEET
Features:
NOTE: Color and external shell style may vary depending on option and availability; Typically Black/Gray or Red.
WARNING: WORK IN A WELL VENTILATED AREA and use protective equipment when working with DTF products and processes. UNINET highly recommends the use of a fume extractor to handle the fumes caused by TPU adhesive powder curing. Bodily protection, including the use of PPE equipment such as a full body covering, a respirator / N95 mask, goggles and gloves are recommended to protect against TPU adhesive powder (prior to curing) that may become airborne due to handling. Inhalation of TPU adhesive powder or fumes may be hazardous to your health. The use of DTF equipment, chemicals, powders, inks and all accessories are at the sole risk of the user. DTF equipment is intended for use in a commercial environment. UNINET does not recommend the use of DTF equipment in a residential, or in-home setting. DTF inks and film require a good humidity environment - over 50% humidity is highly recommended to minimize risk of ink clogs and film buckling.
Crated Dimensions – 48 in x 28 in x 40 in
Weight – 190lbs
Sold in packs of
: