This is the NEW GENERATION HEAT STATION XXL Size | Designed as an in-line addition to any DTF printing setup. This is a 16.5" x 24" heating station with adjustable temperature and time controls.

This equipment is designed for curing DTF powder to the film, so you don't have to do so in an oven or other heating device. High-quality design ensures reliability and long-lasting use.

 Also works perfectly with DTG printers that are being used for DTF, (including for the Ricoh Ri1000 / Ri2000, Epson F2000/F2100/F3070 and the Brother GTX / GTXPro DTG Printers). Most DTG printers have platen sizes up to 16" x 20" (the heating surface of this Heat Station accommodates up to 16.5" x 24"). This Heat Station can handle DTF film that covers these DTG platen sizes, plus some additional space for even larger sheets / platens that may arise in future.

Features:

• Accepts DTF Film Sizes including A4, A3, A3+ and A2 (up to 16.5" x 24")
• Compact Design Ensures Safe Placement on Any Tabletop or Counter (External Dimensions 24.5" L x 21" W x 6.5" H)
• Energy Efficient Design Ensures Low Power Consumption
• Adjustable Vent
• Adjustable Temperature and Time
  • Recommended Temperature for A3 or larger sheets, use 125°C for 135 -145 seconds. For A4 or smaller sheets use 120° C for 120 seconds)
• New Heating Plate Design for even and consistent heating
• Buzzer prompts when the countdown is over
• 110V - plugs into a regular outlet (7.3 Amps)
• Use of a fume extractor fan is recommended

WARNING: WORK IN A WELL VENTILATED AREA and use protective equipment when working with DTF products and processes. UNINET highly recommends the use of a fume extractor to handle the fumes caused by TPU adhesive powder curing. Bodily protection, including the use of PPE equipment such as a full body covering, a respirator / N95 mask, goggles and gloves are recommended to protect against TPU adhesive powder (prior to curing) that may become airborne due to handling. Inhalation of TPU adhesive powder or fumes may be hazardous to your health. The use of DTF equipment, chemicals, powders, inks and all accessories are at the sole risk of the user. DTF equipment is intended for use in a commercial environment. UNINET does not recommend the use of DTF equipment in a residential, or in-home setting. DTF inks and film require a good humidity environment - over 50% humidity is highly recommended to minimize risk of ink clogs and film buckling.