DTF Adhesive Transfer Powder - works with all DTF printers utilizing DTF ink and DTF Transfer Sheets or Rolls.

WHITE DTF TRANSFER POWDER is best for use with WHITE or LIGHT colored garments.

BLACK DTF TRANSFER POWDER is best for use with BLACK or DARK colored garments. The black powder works in the same way that white powder does. When using on a black or dark colored garment, any stray adhesive that may have been left on the transfer sheet will blend in with the color of the shirt. 

Uninet DTF Adhesive Transfer Powder is a proprietary, specially formulated Thermoplastic Polyurethane (TPU) Hot Melt Adhesive Powder, also referred to as 'PreTreat' powder.

A DTF TRANSFER is accomplished by using DTF Transfer Sheets and DTF Transfer Powder.

First, print to DTF Transfer Sheets or Rolls; then cover your print with DTF Adhesive powder and cure; and finally heat press it to your garments or textiles.

WARNING: WORK IN A WELL VENTILATED AREA and use protective equipment when working with DTF products and processes. UNINET highly recommends the use of a fume extractor to handle the fumes caused by TPU adhesive powder curing. Bodily protection, including the use of PPE equipment such as a full body covering, a respirator / N95 mask, goggles and gloves are recommended to protect against TPU adhesive powder (prior to curing) that may become airborne due to handling. Inhalation of TPU adhesive powder or fumes may be hazardous to your health. The use of DTF equipment, chemicals, powders, inks and all accessories are at the sole risk of the user. DTF equipment is intended for use in a commercial environment. UNINET does not recommend the use of DTF equipment in a residential, or in-home setting. DTF inks and film require a good humidity environment - over 50% humidity is highly recommended to minimize risk of ink clogs and film buckling.