DTF Liquid MagicSeal Kit - Includes 500ml V2 MagicSeal Odorless Liquid, Spray Bottle and PTFE Sheet
available!
UNINET® Part #DTFLIQUIDMAGICV2500S
NEW VERSION 2 ODORLESS VERSION!
Transform Your Printing Game with the MagicSeal™ Spray!
What's Included:
Each 500ml bottle is sufficient for up to 150 heat presses (based on letter-sized prints)!
Note – The spray bottle included with this kit features Endless Mist Technology: Continuous mist spray bottle that delivers ultra fine mist spray with every press. One press of the trigger can deliver 5 – 10 seconds of mist. Please do not over-pump the trigger.
How Does the MagicSeal ™ Spray Work?
The MagicSeal Spray enhances the durability, washability and hand-feel of your printed designs on apparel with a simple, professional three-step process:
Why Use the MagicSeal ™ Spray?
MagicSeal™ Spray is the result of innovative development and is currently patent pending. This designation ensures that our proprietary formula and technology are uniquely engineered to bring unparalleled performance to your printing process.
The improvement in hand feel may be less noticeable if you are already optimizing your RIP/rasterization settings, white ink management, and using high-quality consumables—all of which contribute to improved hand feel. The enhancement from MagicSeal is incremental; if you are not optimizing these other factors and only use MagicSeal, the improvement will be more pronounced. If everything else is already optimized, MagicSeal will still provide a noticeable improvement, albeit to a lesser extent.
This product is designed as a post press product only and should only be used after the initial press has cooled down and the transfer film was peeled. Not for use on premade transfers which have already gone through the post press process.
The Magic Seal Spray has been tested and works great with DTF, White Toner Transfers, DTG and Vinyl / Eco solvent.
WARNING: WORK IN A WELL VENTILATED AREA and use protective equipment when working with DTF products and processes. UNINET highly recommends the use of a fume extractor to handle the fumes caused by TPU adhesive powder curing. Bodily protection, including the use of PPE equipment such as a full body covering, a respirator / N95 mask, goggles and gloves are recommended to protect against TPU adhesive powder (prior to curing) that may become airborne due to handling. Inhalation of TPU adhesive powder or fumes may be hazardous to your health. The use of DTF equipment, chemicals, powders, inks and all accessories are at the sole risk of the user. DTF equipment is intended for use in a commercial environment. UNINET does not recommend the use of DTF equipment in a residential, or in-home setting. DTF inks and film require a good humidity environment - over 50% humidity is highly recommended to minimize risk of ink clogs and film buckling.
Sold in packs of
: